Automatic loading robotic arm for molding press machine-MD13-65-F-V

Product Features:

★ This equipment is suitable for seamless integration with non-spherical molding press machines from brands such as JinDing Optics (our company), DTK, SYS, etc. The automatic loading robotic arm can be customized according to the specific needs of customers.
★ This equipment can meet the automation production requirements of one mold with one cavity, one mold with two cavities, one mold with three cavities, one mold with four cavities, and one mold with six cavities.
★ The automatic loading robotic arm is equipped with a vision system for real-time automatic detection of the upper and lower mold surfaces (appearance) and the lens surface (appearance).

Specification Parameters:

NO	Project distinction	Content	Detailed specifications
1	Basic parameters	power source	Power supply: single-phase 220V; rated power: 2KW;
		power source	Compressed air: 0.55MPa±5%, 50 liters/min;
		Mold specification	Diameter: φ15~φ65mm; Height: 20 ~60mm; Square: 50×50mm Scope of application: one mold and one hole (claw type, optional top pen device) Two holes in one mold, three holes in one mold, four holes in one mold, six holes in one mold (vacuum adsorption type) Note: It is a multi-hole suction method
		Dimensions	1800(L)×1300(W)×2100(H); Approx. weight: 1300kg
3	drive mode	High precision electric cylinder cylinder	High-precision electric cylinder and SMC cylinder
4	Processing cycle	around 60s	Depending on the processing model
5	Tray capacity	finished tray	One layer, can hold 15 small rings 140×90
		preform tray	One round layer, diameter 475mm can hold four 150×130
		Defective product tray	140mm×90mm
6	Air purification	FFU fan unit	Realize the air repurification of the small environment of the equipment
7	visual system	vision	Monitor the cosmetic condition of molds and lenses
8	Mold, lens and preform transfer	transfer	Transfer of molds, lenses and preforms using pneumatic cylinders, pneumatic fingers, electric cylinders, error correctors and through-beam photoelectric sensors
9	Environmental requirements	humidity	30-60%, but no condensation
9	Environmental requirements	temperature	Normal temperature 20-28°C, but no condensation